Varilight JQP401W V-Pro 1 Gang 2-Way LED Trailing Edge Dimmer Switch, White

Product Information

way or 2 way operation. Allows dimming from 1 side of the room and switching from another. If 2 way dimming is required then see the Varilight Eclique range were a master and slave touch dimmer can be used.

Here's an example. In your lounge there is a light fitting with 2 x 20W light bulbs currently controlled by a single switch. You want to buy a dimmer to replace the switch. In your local DIY shop there are two dimmers available, one with a minimum rating of 40W and the other 60W. In this case the total lighting load is 2 x 20W = 40W. Therefore you would need to choose the dimmer with the 40W minimum load.

To help with this process Varilight have produced an excellent video which is below Written Instructions

We also have a range of Smart Rotary dimmers for use with Multi-Way circuits with Master dimmers and Supplementary Controllers. You can find information on these below. See the V-Pro SmartSupla dimmer that's compatible with WiFi and Smart Home Applications here. If the programming has been successful, the light(s) will turn on and turn off. The lights then step up and down once to confirm. For best results with low voltage lighting use VARILIGHT intelligent dimmer switches with VARILIGHT electronic transformers. There is no limit on the number of transformers you can use as long as you keep within the maximum rating of the dimmer. VARILIGHT electronic transformers are suitable for controlling 12V a.c. rated LEDs (MR16). V-Pro dimmers are not suitable for wire-wound "toroidal" transformers. Suitable loads: V-ProMulti-Pointseries dimmers are designed for use with LEDs and work with most dimmable LEDs on the market. They are also suitable for most dimmable electronic transformers. Please adhere to maximum rating listed on the datasheets or instruction leaflet.Please note that it can take several weeks for the chemicals in paint or wallpaper paste to become inert. Before this time there is a danger that they will react with the product if it has a metal faceplate. For this reason we recommend using a plastic bag as a temporary gasket between the product and the wall once it is dry to the touch. In other words, use the plastic to form a barrier between the product and the surface of the wall.